Fittings standard data
Hebei haihao group can produce the pipe fittings as per the follows standards :
ASME/ ANSI Standard Pipe Fitti
- ANSI B16.9 – 2012 – Factory-Made Wrought Steel Butt-welding Fittings
- ANSI B16.11-2005- Forged Fittings, Socket-Welding and Threaded
- ANSI B16.25 -2012- Butt welding Ends
- ANSI B16.28-1994-Wrought-Steel-Butt-Welding-Short-Radius-Elbows-And-Returns
- ANSI B16.49-2012 Factory Made Wrought Steel Butt-welding Induction Bends for Transportation and Distribution Systems
- ANSI B36.19M 2004 STAINLESS STEEL PIPE
- ANSI B36.10M 2004 Welded and Seamless Wrought Steel Pipe
MSS SP Pipe Fittings
EN Standard Pipe Fittings
- BS EN 10253-1 Butt-Welding Pipe Fittings Wrought Carbon Steel for General Use and Without Specific Inspection Requirements
- BS EN 10253-2 Butt-welding pipe fittings. part 2: Non alloy ferritic alloy steels with specific inspection requirements
- BS EN10253-3 Butt-welding pipe fittings Part 3:Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
- BS-EN-10253-4-2008 Butt-welding pipe fittings Part 4 Wrought austenitic and austenitic-ferritic (duplex)stainless steels with specific inspection requirements
- BS EN 10241-2000 Steel threaded pipe fittings
DIN Standard Pipe Fittings
- DIN 2605 part1-1991 Steel butt-welding pipe fittings Elbows and bends with reduced pressure factor
- DIN 2605 part2 1995 Steel butt-welding pipe fittings Elbows and bends for use at full service pressure
- DIN 2609 1991 Steel butt-welding pipe fittings-Technical delivery conditions
- DIN 2615 part1 1992 Steel butt-welding pipe fittings Tees with reduced pressure factor
- DIN 2615 part2 1992 Steel butt-welding pipe fittings Tees for use at full service pressure
- DIN 2616 part1 1991 Steel butt-welding pipe fittings Eccentric reducers with reduced pressure factor
- DIN 2616 part2 1991 Steel butt-welding pipe fittings Reducers for use at full service pressure
- DIN2617 1991 Steel butt-welding pipe fittings-Caps
- DIN 2982 Screwed Steel Pipe Fittings Parallel Nipples,Taper Nipples
- DIN 2986 Threaded Steel Pipe Fittings Sockets
- DIN 28011 Torispherical-heads
GOST Standard Pipe Fittings
- GOST 17375-2001 Carbon and low-alloy steel butt-welding fittings.Sharply curved bends type 3D(R=1.5DN).Design
- GOST 17376-2001 Carbon and low-alloy steel butt-welding fittings.Tees.Design
- GOST 17378-2001 Carbon and low-alloy steel butt-welding fittings Reducers Design
- GOST 17379-2001 Carbon and low-alloy steel butt-welding fittings Elliptical caps Design
- GOST 17380-2001 Carbon and low-alloy steel butt-welding fittings General specifications
- GOST 30753-2001 Carbon and low-alloy steel butt-weldings fittings Sharply curved bends type 2D (R=DN) Design